Home > Exhibition > Content

Product Categories

Contact Information

Dongguan Goodjob Precision Components Co.,Ltd.

ADD: No.68, Changsheng North Road, Dalang,Dongguan,Guangdong,China

Tel: +86-769-23327726

Fax: +86-769-23327736

Email:info@goodjcnc.com

The use of WEDM for precision machining
Jun 20, 2018

Along with the development of new technology,new material and new process,to improve the abrasive resistance of the mould,people will use material with high strength,high hardness and high flexile for mould production.This is very useful to improve the use life of mould,but it also brings problem for EDM machining the allowance of workpiece.To improve the surface precision and meet the high efficiency requirements of mould production,we should reduce the machining work after EDM as small as possible.This decide that people can’t use EDM for just one time to machining the workpiece allowance but need EDM machining for several times.Only this can ensure the surface quality and precision of mould.

 

The EDM is using the line electrode(always use 0.1-0.3mm copper wire)connect with cathode,and connect the machined workpiece with anode,when apply some power between the athode and anode,the electrolyte in the gap will have electric discharge phenomena.Using the instant high temperature,the material on the workpiece will stripping and vaporization.So this method can process the components which can’t be processed by general method.At the same time,the line electrode will move when processing,it can ensure the processing precision as the line electrode can be supplement once it is loss.